LABFAST® LO
Long Working Time, Quick Curing and Low-Odor Polyaspartic
LABFAST® LO is a low-odor, two-component (1A:1B) high solids polyaspartic coating, non-yellowing, commonly used with vinyl flakes. The colored LABFAST® LO serves as the base coat, while the clear version used as a protective topcoat, both sharing a common hardener.
Two high-solids versions are available, 85% and 90% solids.
LABFAST® LO 85 offers three variations:
- LO 85-: Ultra-Fast Set
- LO 85+: Prolonged Working Time
- LO 85 XT: Extra Working Time
LABFAST® LO 90 offers two variations:
- LO 90-: Ultra-Fast Set
- LO 90+: Prolonged Working Time
Both, LABFAST® LO 85 and LABFAST® LO 90 provide optimal work time/cure time ratio. The short curing time, with a tack free in as low as 45 minutes*, allows the installation of a full floor system in one single day, with rapid return to service. The product displays excellent curing capability even at very low temperature levels. This product offers superior mechanical and chemical properties and is low maintenance. It also displays a superior aesthetic finish and excellent UV stability which makes it ideal for interior and exterior applications. We recommend the utilization of the LABTEC Vinyl Chips in combination with LABFAST®/LABSHIELD® ECO products. Two or three-coat systems can be considered.
*See respective TDS’s for more details.
2-Gallon Kit = 1 x A (1 Gal) + 1 x B (1 Gal)
10-Gallon Kit = 1 x A (5 Gal) + 1 x B (5 Gal)
| LABFAST LO |
Working time* |
Tack Free* |
Viscosity (cps) |
VOC | Abrasion ASTM D4060 (1000 cycles) |
Delta E |
|---|---|---|---|---|---|---|
| 85- | 15 min | 45 min | 300 +/-50 | 169 g/l | 30 mg | <2.0 |
| 85+ | 25 min | 1 h 15 | 300 +/-50 | 169 g/l | 30 mg | <2.0 |
| 85 XT | 30 min | 1 h 30 | 300 +/-50 | 212 g/l | 30 mg | <2.0 |
| 90- | 15 min | 45 min | 500 +/-50 | 122 g/l | 30 mg | <2.0 |
| 90+ | 25 min | 1 h 20 | 500 +/-50 | 144 g/l | 30 mg | <2.0 |
* 22°C / 72°F and 50% Rel. Hum.
