Epoxy Coatings
Industrial Grade Products, Superior Aesthetic Finish
LABPOX epoxy lines are two-component epoxy floor coating systems which are 100% solids and virtually odor free. Our formulations are based on high performance cycloaliphatic polyamine technologies displaying outstanding properties and a superior aesthetic finish. Our LABPOX products possess superior mechanical and chemical resistance properties ideally suited for the most demanding applications as well as to obtain an impeccable finish. LABPOX 40 UV possesses one of the best UV resistance (yellowing) in the industry.
OUR PRODUCTS:
EPOXY PRIMER
VOC-Free Epoxy Primer
The EPOXY PRIMER is a two-component VOC-free and 100% solids primer epoxy coating system. It offers a combination of long pot life/working time and fast curing. This product possesses superior mechanical properties best suited for industrial applications but can also be used for commercial and residential applications. It has been formulated to obtain superior adhesion on concrete for high traffic applications. The EPOXY PRIMER formulation is based on a high-performance cycloaliphatic amine technology and has a very low viscosity and excellent early blush resistance.
3-Gallon Kit = 2 x A (1 Gal) + 1 x B (1 Gal)
15-Gallon Kit = 2 x A (5 Gal) + 1 x B (5 Gal)
LABPOX MVB FAST
100% Solids, High Performance Moisture Vapor Barrier Epoxy
The LABPOX MVB FAST is used as a moisture vapor barrier epoxy primer prior installing a complete epoxy or polyaspartic system. This product possesses superior mechanical properties best suited for industrial applications but can also be used for commercial and residential applications. The LABPOX MVB FAST acts as a moisture barrier for concrete floors with high residual humidity (up to 100%) as well as new concrete slabs installed within 28 days. The product can receive a subsequent layer of coating in as little as 3-4 hrs, thus enabling very rapid commissioning. The product has been formulated with state-of-the-art components representing the most efficient vapor barrier technology available in the industry.
2.5-Gallon Kit = A (6.67L) + B (2.78L)
Improved version of the LABPOX MVB FAST
More convenient mix ratio
– The new 2:1 ratio makes it a lot easier when using partial kits
– No more waste
More Working Time
– 10 more minutes to work the product, from 20 to 30 minutes
– Only 4 hours for Dry to Touch, slightly up from 3 hours previously
3-Gallon Kit = 2 x A (1 Gal) + 1 x B (1 Gal)
LABPOX 30
100% Solids, High Performance Epoxy
The LABPOX 30 can be used both as a basecoat as well as a topcoat. The product is a 100% solids two-component (2A:1B) epoxy floor coating system which is virtually VOC-free. This product possesses superior mechanical properties best suited for industrial applications but can also be used for commercial and residential applications. For high traffic applications we recommend using our EPOXY PRIMER prior to the installation of the LABPOX 30. It offers a working time of approximately 60 minutes, it displays a low viscosity and it is resistant to amine blush. By using the appropriate LABPOX system, professional installers can achieve optimal results within a desired timeframe. The LABPOX 30 is ideally suited for metallic systems. Available in an unlimited choice of colors.
3-Gallon Kit = 2 x A (1 Gal) + 1 x B (1 Gal)
15-Gallon Kit = 2 x A (5 Gal) + 1 x B (5 Gal)
LABPOX FAST CURE
100% Solids, High Performance Fast Cure Epoxy
LABPOX FAST CURE can be used both as a base coat and as a top coat. For heavy traffic applications, we recommend using Labsurface’s EPOXY PRIMER as a primer coat. The product is a 100% solids two-component (2A:1B) epoxy floor coating system which is virtually VOC-free. This product possesses superior mechanical properties best suited for industrial applications but can also be used for commercial and residential applications. LABPOX FAST CURE has superior mechanical properties, making it an ideal choice for industrial, commercial and residential applications. Dry to touch in 4 hours, this product is an ideal choice for applications requiring rapid return to service. The LABPOX FAST CURE is available in an unlimited choice of colors.
3-Gallon Kit = 2 x A (1 Gal) + 1 x B (1 Gal)
15-Gallon Kit = 2 x A (5 Gal) + 1 x B (5 Gal)
LABPOX 35
100% Solids, High Performance Epoxy for Industrial Applications
The LABPOX 35 is an epoxy system specifically designed for industrial applications and to minimize the occurence of pin holes. The product is a 100% solids two-component (2A:1B) epoxy floor coating system which is virtually VOC-free. This product possesses superior mechanical properties best suited for industrial applications but can also be used for commercial and residential applications. The LABPOX 35 offers a long pot life and working time. It has been designed as a topcoat epoxy but it is self-priming. For heavy traffic applications, we recommend using Labsurface’s EPOXY PRIMER prior the installation.
3-Gallon Kit = 2 x A (1 Gal) + 1 x B (1 Gal)
15-Gallon Kit = 2 x A (5 Gal) + 1 x B (5 Gal)
LABPOX 40 UV
100% Solids, High Performance Epoxy Providing a Superior UV Resistance
The LAPBOX 40 UV has one of the highest UV resistance in the industry (slow yellowing) which makes it a first-in-class product for applications requiring a superior aesthetic finish. The LABPOX 40 UV can be used both as a base coat as well as a top coat. The product is a 100% solids two-component (2A:1B) epoxy floor coating system which is virtually VOC-free. This product possesses superior mechanical properties best suited for commercial and residential applications. It offers a working time of approximately 60 minutes, displays a low viscosity and it is resistant to amine blush. By using the appropriate LABPOX system, professional installers can achieve optimal results within a desired timeframe. The LABPOX 40 UV is also ideally suited for metallic systems.
3-Gallon Kit = 2 x A (1 Gal) + 1 x B (1 Gal)
LABPOX LV
100% Solids, Ultra-Low Viscosity High Performance Epoxy
The LABPOX LV is a 100% solids two-component (2A:1B) ultra-low viscosity epoxy floor coating system which is virtually VOC-free. This product possesses mechanical properties best suited for aesthetic clear or metallic residential and commercial applications. It offers one of the longest pot life and working time of the industry. The LABPOX LV has been designed for metallic epoxy or clear flooring systems. The LABPOX LV formulation is based on a high-performance cycloaliphatic polyamine technology displaying outstanding properties and superior aesthetic finish.
EPOXY PRIMER
VOC-Free Epoxy Primer
The EPOXY PRIMER is a two-component VOC-free and 100% solids primer epoxy coating system. It offers a combination of long pot life/working time and fast curing. This product possesses superior mechanical properties best suited for industrial applications but can also be used for commercial and residential applications. It has been formulated to obtain superior adhesion on concrete for high traffic applications. The EPOXY PRIMER formulation is based on a high-performance cycloaliphatic amine technology and has a very low viscosity and excellent early blush resistance.
3-Gallon Kit = 2 x A (1 Gal) + 1 x B (1 Gal)
15-Gallon Kit = 2 x A (5 Gal) + 1 x B (5 Gal)
LABPOX MVB FAST
100% Solids, High Performance Moisture Vapor Barrier Epoxy
The LABPOX MVB FAST is used as a moisture vapor barrier epoxy primer prior installing a complete epoxy or polyaspartic system. This product possesses superior mechanical properties best suited for industrial applications but can also be used for commercial and residential applications. The LABPOX MVB FAST acts as a moisture barrier for concrete floors with high residual humidity (up to 100%) as well as new concrete slabs installed within 28 days. The product can receive a subsequent layer of coating in as little as 3-4 hrs, thus enabling very rapid commissioning. The product has been formulated with state-of-the-art components representing the most efficient vapor barrier technology available in the industry.
2.5-Gallon Kit = A (6.67L) + B (2.78L)
Improved version of the LABPOX MVB FAST
More convenient mix ratio
– The new 2:1 ratio makes it a lot easier when using partial kits
– No more waste
More Working Time
– 10 more minutes to work the product, from 20 to 30 minutes
– Only 4 hours for Dry to Touch, slightly up from 3 hours previously
3-Gallon Kit = 2 x A (1 Gal) + 1 x B (1 Gal)
LABPOX 30
100% Solids, High Performance Epoxy
The LABPOX 30 can be used both as a basecoat as well as a topcoat. The product is a 100% solids two-component (2A:1B) epoxy floor coating system which is virtually VOC-free. This product possesses superior mechanical properties best suited for industrial applications but can also be used for commercial and residential applications. For high traffic applications we recommend using our EPOXY PRIMER prior to the installation of the LABPOX 30. It offers a working time of approximately 60 minutes, it displays a low viscosity and it is resistant to amine blush. By using the appropriate LABPOX system, professional installers can achieve optimal results within a desired timeframe. The LABPOX 30 is ideally suited for metallic systems. Available in an unlimited choice of colors.
3-Gallon Kit = 2 x A (1 Gal) + 1 x B (1 Gal)
15-Gallon Kit = 2 x A (5 Gal) + 1 x B (5 Gal)
LABPOX FAST CURE
100% Solids, High Performance Fast Cure Epoxy
LABPOX FAST CURE can be used both as a base coat and as a top coat. For heavy traffic applications, we recommend using Labsurface’s EPOXY PRIMER as a primer coat. The product is a 100% solids two-component (2A:1B) epoxy floor coating system which is virtually VOC-free. This product possesses superior mechanical properties best suited for industrial applications but can also be used for commercial and residential applications. LABPOX FAST CURE has superior mechanical properties, making it an ideal choice for industrial, commercial and residential applications. Dry to touch in 4 hours, this product is an ideal choice for applications requiring rapid return to service. The LABPOX FAST CURE is available in an unlimited choice of colors.
3-Gallon Kit = 2 x A (1 Gal) + 1 x B (1 Gal)
15-Gallon Kit = 2 x A (5 Gal) + 1 x B (5 Gal)
LABPOX 35
100% Solids, High Performance Epoxy for Industrial Applications
The LABPOX 35 is an epoxy system specifically designed for industrial applications and to minimize the occurence of pin holes. The product is a 100% solids two-component (2A:1B) epoxy floor coating system which is virtually VOC-free. This product possesses superior mechanical properties best suited for industrial applications but can also be used for commercial and residential applications. The LABPOX 35 offers a long pot life and working time. It has been designed as a topcoat epoxy but it is self-priming. For heavy traffic applications, we recommend using Labsurface’s EPOXY PRIMER prior the installation.
3-Gallon Kit = 2 x A (1 Gal) + 1 x B (1 Gal)
15-Gallon Kit = 2 x A (5 Gal) + 1 x B (5 Gal)
LABPOX 40 UV
100% Solids, High Performance Epoxy Providing a Superior UV Resistance
The LAPBOX 40 UV has one of the highest UV resistance in the industry (slow yellowing) which makes it a first-in-class product for applications requiring a superior aesthetic finish. The LABPOX 40 UV can be used both as a base coat as well as a top coat. The product is a 100% solids two-component (2A:1B) epoxy floor coating system which is virtually VOC-free. This product possesses superior mechanical properties best suited for commercial and residential applications. It offers a working time of approximately 60 minutes, displays a low viscosity and it is resistant to amine blush. By using the appropriate LABPOX system, professional installers can achieve optimal results within a desired timeframe. The LABPOX 40 UV is also ideally suited for metallic systems.
3-Gallon Kit = 2 x A (1 Gal) + 1 x B (1 Gal)
LABPOX LV
100% Solids, Ultra-Low Viscosity High Performance Epoxy
The LABPOX LV is a 100% solids two-component (2A:1B) ultra-low viscosity epoxy floor coating system which is virtually VOC-free. This product possesses mechanical properties best suited for aesthetic clear or metallic residential and commercial applications. It offers one of the longest pot life and working time of the industry. The LABPOX LV has been designed for metallic epoxy or clear flooring systems. The LABPOX LV formulation is based on a high-performance cycloaliphatic polyamine technology displaying outstanding properties and superior aesthetic finish.
PROTECTIVE LAYER (optional)
Our water-based aliphatic polyurethane, AQUALAB PUR, can be used as a protective layer on LABPOX products as well as a matte, satin or glossy finish. The product is offered in a smooth clear finish. The gloss is also available in a colored version. It can be applied as a protective and decorative layer over Labsurface’s LABPOX epoxies. The AQUALAB PUR has a superior chemical resistance to protect standard epoxies from staining prematurely. It also offers an additional UV protection that will significantly slow the yellowing of the epoxies. The AQUALAB PUR formulation is based on advanced aliphatic water-based polyol technology displaying superior aesthetic finish and excellent UV stability.
STANDARD SYSTEM
| Product | Mix Ratio | Working Time | Tack Free | Color / Finish | Primer Coat | Base Coat | Top Coat | Protective Coat (optional |
|---|---|---|---|---|---|---|---|---|
| EPOXY PRIMER (optional) |
2A : 1B | 45 min | 4 h | Clear / Glossy | 4 – 6 mils | |||
| LAPBPOX MVB FAST (optional) |
2.4A : 1B 2A : 1B |
20 min 30 min |
3 h 4 h |
Clear / Gray / Tan / Black / White | 16 mils | |||
| LABPOX 30 | 2A : 1B | 60 min | 9 h | Unlimited / Glossy | 8 – 10 mils | 10 – 12 mils | ||
| LABPOX 35 | 2A : 1B | 45 min | 5 h | Unlimited / Glossy | 8 – 10 mils | 10 – 12 mils | ||
| LABPOX 40 UV | 2A : 1B | 60 min | 9 h | Clear / Super Opaque White / Glossy | 8 – 10 mils | 10 – 12 mils | ||
| AQUALAB PUR (optional) |
5A : 1B | 20 min | Refer to TDS |
Clear / Gray (Glossy only) / Glossy / Satin / Matte |
Refer to TDS |
