Protective Coatings
Topcoats utilizing cutting-edge technology
At Labsurface, we believe using a protective coating is essential for maintaining the longevity and integrity of your floors. Our commitment to research and development allows us to create innovative products that stand out in the industry. The AQUALAB® PUR is a low odor, water-based polyurethane coating that offers a durable finish, while the LABFENDER™ provides exceptional abrasion and chemical resistance, ideal for high-traffic environments. Both products ensure superior protection and performance for a variety of applications.
AQUALAB® PUR
Topcoat, High-Performance Water-Based Aliphatic Polyurethan
AQUALAB® PUR is low-odor, low-VOC, two-component, and non-yellowing water-based aliphatic polyurethane floor coating. The product is offered in a gloss, satin and a matte clear finish and is non-yellowing. The gloss is also available in a colored version. It can be applied directly on the concrete or as a protective and decorative layer over Labsurface’s LABPOX® epoxies.
1-Gallon Kit = 1 x A (3.2 L) + 1 x B (0.6 L)
Tips and Tricks
To obtain a smooth surface with a slight orange peel finish, AQUALAB® PUR SATIN and GLOSS versions must be applied at a thickness of 4 mils (wet). To learn more about installation techniques and avoid roll marks:
DOWNLOADS (PDF)
LABFENDER™ (NEW)
Moisture-Cured Aliphatic Polyurethane
The LABFENDER™ (NEW) is a two or three-component, high solids, aliphatic polyurethane floor coating product which has low-VOC. It is designed to be applied as a protective layer over Labsurface’s LABPOX® epoxies, LABFAST® and LABSHIELD® ECO polyaspartic coatings. LABFENDER™ (NEW) boasts exceptional abrasion resistance, making it less likely for traffic patterns to appear over time even if exposed to heavy or repeated use caused by equipment, forklifts, presence of high foot traffic. The LABFENDER™ (NEW) has a superior chemical resistance which offers unparalleled protection against transfer of plasticizers with up to 60 times more resistance1, making it an ideal candidate to protect floors from staining prematurely. It also offers an additional UV protection that will significantly delay the yellowing of the epoxies it is applied on. LABFENDER™ (NEW) long working time allows to achieve maximum floor surface installations with minimal crew. The LABFENDER™ (NEW) formulation is based on advanced aliphatic urethane technology displaying superior chemical resistance.
1-Gallon Kit = 1 x A (0.8 Gal) + 1 x B (0.2 Gal) + 1 x C 3 lb LABTEC Aluminium Oxide
¹ Labsurface’s tests were performed at a range of 80-90°C (176-194°F). At those temperature levels the LABFENDER™ lasts up to 60x longer than any 1K or 2K products / technology that were tested with tires in laboratory by our R&D team.
LABFENDER™
Moisture-Cured Aliphatic Polyurethane
The LABFENDER™ is a two or three-component, high solids, aliphatic polyurethane floor coating product which has low-VOC. It is designed to be applied as a protective layer over Labsurface’s LABPOX® epoxies, LABFAST® and LABSHIELD® ECO polyaspartic coatings. LABFENDER™ boasts exceptional abrasion resistance, making it less likely for traffic patterns to appear over time even if exposed to heavy or repeated use caused by equipment, forklifts, presence of high foot traffic. The LABFENDER™ has a superior chemical resistance which offers unparalleled protection against transfer of plasticizers with up to 60 times more resistance1, making it an ideal candidate to protect floors from staining prematurely. It also offers an additional UV protection that will significantly delay the yellowing of the epoxies it is applied on. LABFENDER™ long working time allows to achieve maximum floor surface installations with minimal crew. The LABFENDER™ formulation is based on advanced aliphatic urethane technology displaying superior chemical resistance.
1-Gallon Kit = 1 x A (0.86 Gal) + 1 x B (0.14 Gal)
¹ Labsurface’s tests were performed at a range of 80-90°C (176-194°F). At those temperature levels the LABFENDER™ lasts up to 60x longer than any 1K or 2K products / technology that were tested with tires in laboratory by our R&D team.
AQUALAB® PUR
Topcoat, High-Performance Water-Based Aliphatic Polyurethan
AQUALAB® PUR is low-odor, low-VOC, two-component, and non-yellowing water-based aliphatic polyurethane floor coating. The product is offered in a gloss, satin and a matte clear finish and is non-yellowing. The gloss is also available in a colored version. It can be applied directly on the concrete or as a protective and decorative layer over Labsurface’s LABPOX® epoxies.
1-Gallon Kit = 1 x A (3.2 L) + 1 x B (0.6 L)
Tips and Tricks
To obtain a smooth surface with a slight orange peel finish, AQUALAB® PUR SATIN and GLOSS versions must be applied at a thickness of 4 mils (wet). To learn more about installation techniques and avoid roll marks:
DOWNLOADS (PDF)
LABFENDER™ (NEW)
Moisture-Cured Aliphatic Polyurethane
The LABFENDER™ (NEW) is a two or three-component, high solids, aliphatic polyurethane floor coating product which has low-VOC. It is designed to be applied as a protective layer over Labsurface’s LABPOX® epoxies, LABFAST® and LABSHIELD® ECO polyaspartic coatings. LABFENDER™ (NEW) boasts exceptional abrasion resistance, making it less likely for traffic patterns to appear over time even if exposed to heavy or repeated use caused by equipment, forklifts, presence of high foot traffic. The LABFENDER™ (NEW) has a superior chemical resistance which offers unparalleled protection against transfer of plasticizers with up to 60 times more resistance1, making it an ideal candidate to protect floors from staining prematurely. It also offers an additional UV protection that will significantly delay the yellowing of the epoxies it is applied on. LABFENDER™ (NEW) long working time allows to achieve maximum floor surface installations with minimal crew. The LABFENDER™ (NEW) formulation is based on advanced aliphatic urethane technology displaying superior chemical resistance.
1-Gallon Kit = 1 x A (0.8 Gal) + 1 x B (0.2 Gal) + 1 x C 3 lb LABTEC Aluminium Oxide
¹ Labsurface’s tests were performed at a range of 80-90°C (176-194°F). At those temperature levels the LABFENDER™ lasts up to 60x longer than any 1K or 2K products / technology that were tested with tires in laboratory by our R&D team.
LABFENDER™
Moisture-Cured Aliphatic Polyurethane
The LABFENDER™ is a two or three-component, high solids, aliphatic polyurethane floor coating product which has low-VOC. It is designed to be applied as a protective layer over Labsurface’s LABPOX® epoxies, LABFAST® and LABSHIELD® ECO polyaspartic coatings. LABFENDER™ boasts exceptional abrasion resistance, making it less likely for traffic patterns to appear over time even if exposed to heavy or repeated use caused by equipment, forklifts, presence of high foot traffic. The LABFENDER™ has a superior chemical resistance which offers unparalleled protection against transfer of plasticizers with up to 60 times more resistance1, making it an ideal candidate to protect floors from staining prematurely. It also offers an additional UV protection that will significantly delay the yellowing of the epoxies it is applied on. LABFENDER™ long working time allows to achieve maximum floor surface installations with minimal crew. The LABFENDER™ formulation is based on advanced aliphatic urethane technology displaying superior chemical resistance.
1-Gallon Kit = 1 x A (0.86 Gal) + 1 x B (0.14 Gal)
¹ Labsurface’s tests were performed at a range of 80-90°C (176-194°F). At those temperature levels the LABFENDER™ lasts up to 60x longer than any 1K or 2K products / technology that were tested with tires in laboratory by our R&D team.
Low Odor and VOC-Exempt
- Non-Yellowing
Superior Mechanical Properties
Exceptional Abrasion Resistance
High Chemical Resistance
Matte Finish Masking Scratches
- Residential, Commercial and Industrial
Product | Mix Ratio | Working Time | Tack Free | Color/Finish | Coat 1 | Coat 2 |
---|---|---|---|---|---|---|
AQUALAB® PUR MATTE | 5A : 1B | 20 min | 1 h | Clear / Matte | 3 mils (wet) 1.25 mils (dry) |
3 mils (wet) 1.25 mils (dry) |
LABFENDER™ | 6A:1B | 60 min | 3 – 4 h | Satin | 2 – 3 mils (wet) | 2 – 3 mils (wet) |