LABFENDER™ (NEW)

The LABFENDER (NEW) is a two or three-component, high solids, aliphatic polyurethane floor coating product which has low-VOC. It is designed to be applied as a protective layer over Labsurface’s LABPOX® epoxies, LABFAST® and LABSHIELD® ECO polyaspartic coatings. LABFENDER (NEW) boasts exceptional abrasion resistance, making it less likely for traffic patterns to appear over time even if exposed to heavy or repeated use caused by equipment, forklifts, presence of high foot traffic. The LABFENDER (NEW) has a superior chemical resistance which offers unparalleled protection against transfer of plasticizers with up to 60 times more resistance1, making it an ideal candidate to protect floors from staining prematurely. It also offers an additional UV protection that will significantly delay the yellowing of the epoxies it is applied on. LABFENDER (NEW) long working time allows to achieve maximum floor surface installations with minimal crew. The LABFENDER (NEW) formulation is based on advanced aliphatic urethane technology displaying superior chemical resistance.

1-Gallon Kit = 1 x A (0.8 Gal) + 1 x B (0.2 Gal) + 1 x C 3 lb LABTEC Aluminium Oxide

¹ Labsurface’s tests were performed at a range of 80-90°C (176-194°F). At those temperature levels the LABFENDER lasts up to 60x longer than any 1K or 2K products / technology that were tested with tires in laboratory by our R&D team.

Labsurface LABFENDER™ (NEW)

DOWNLOADS (PDF)

Technical Data Sheet

Safety Data Sheets

LABFENDER™

The LABFENDERis a two or three-component, high solids, aliphatic polyurethane floor coating product which has low-VOC. It is designed to be applied as a protective layer over Labsurface’s LABPOX® epoxies, LABFAST® and LABSHIELD® ECO polyaspartic coatings. LABFENDERboasts exceptional abrasion resistance, making it less likely for traffic patterns to appear over time even if exposed to heavy or repeated use caused by equipment, forklifts, presence of high foot traffic. The LABFENDER has a superior chemical resistance which offers unparalleled protection against transfer of plasticizers with up to 60 times more resistance1, making it an ideal candidate to protect floors from staining prematurely. It also offers an additional UV protection that will significantly delay the yellowing of the epoxies it is applied on. LABFENDER long working time allows to achieve maximum floor surface installations with minimal crew. The LABFENDERformulation is based on advanced aliphatic urethane technology displaying superior chemical resistance.

1-Gallon Kit = 1 x A (0.86 Gal) + 1 x B (0.14 Gal)

¹ Labsurface’s tests were performed at a range of 80-90°C (176-194°F). At those temperature levels the LABFENDER lasts up to 60x longer than any 1K or 2K products / technology that were tested with tires in laboratory by our R&D team.

Labsurface LABFENDER

DOWNLOADS (PDF)

Technical Data Sheet

Safety Data Sheets