LABFAST® 85 PRO

Best Value, Long Working Time, Quick Curing and Reduced Odor Polyaspartic with Advanced Opacity Technology

Low Viscosity
Long Working Time
Low Temperature Curing
Rapid Curing
Exterior
Full UV Protection
Heavy Traffic

The LABFAST® 85 PRO is a high-solids, two-component (1A:1B), non-yellowing with reduced odor polyaspartic for concrete floor coating, commonly used with vinyl flakes. The colored LABFAST® 85 PRO serves as the base coat, while the clear version is used as a protective topcoat, LABFAST® 85 PRO provides optimal work time/cure time ratio. The utilization of the LABFAST® 85 PRO allows the installation of a full floor system in one single day, with rapid return to service. The LABFAST® 85 PRO displays excellent curing capability even at very low temperature levels. This product offers superior mechanical and chemical properties and is low maintenance. It also displays a superior aesthetic finish and excellent UV stability which makes it ideal for exterior applications. We recommend the utilization of the LABTEC vinyl chips in combination with the LABFAST® products. Two- or three-coat systems can be considered.

  • Best value

  • Low odor

  • LABFAST 85 PRO & LABFAST 85 PRO XT both offer best working to curing times ratio of the industry

  • Fast return to service (tack free and ready to scrape within 55 min)
  • Advanced Opacity Technology significantly increases hiding power of the concrete substrate. Installers will use 15% less topcoat on average because of the increased opacity in the base coat

Labsurface polyaspartic 2-coat system
Labsurface polyaspartic 3-coat system

Why your pre-tinted polyaspartic Part A feels thicker — And why it’s completely normal

Opening a pail of our pre-tinted polyaspartic Part A for the first time and noticing a thicker texture? Don’t worry — that’s exactly how it should be. A quick one-minute premix is all it takes to make the resin smooth, uniform, and ready to blend with Part B for flawless installs every time.

Read More

Why your pre-tinted polyaspartic Part A feels thicker — And why it’s completely normal

Opening a pail of our pre-tinted polyaspartic Part A for the first time and noticing a thicker texture? Don’t worry — that’s exactly how it should be. A quick one-minute premix is all it takes to make the resin smooth, uniform, and ready to blend with Part B for flawless installs every time.

Read More

DOWNLOADS (PDF)

Technical Data Sheet

Product update sheet

Safety Data Sheet