The LABFAST product series are a two-component, high-solid content, polyaspartic coating systems. There is a low odor version, the LABFAST LO and a VOC-exempt version, LABFAST VOC-EXEMPT. The product is available in four levels of solids content: 70, 80, 85 and 90 as well as long working time versions (+) and fast curing versions (-). The different combinations of curing times and viscosities optimize overall system performance and allow one-day installations. The products are easy to mix with a ratio of 1:1 and there is a common hardener for the base and top coat. It is possible to install a two or three coat floor system with the LABFAST. LABFAST products are available in grey, tan and black. Special colors available on request.
2-Gallon Kit =
A 1gal + B 1gal
10-Gallon Kit =
A 5gal + B 5galDownload TDS: LABFAST LO Download TDS: LABFAST VOC-EXEMPT
The LABSHIELD ECO is a 100% solids two-component polyaspartic floor coating system with near zero VOC and no/minimal odor. The LABSHIELD ECO is used as a colored base coat and a clear topcoat using a common hardener. A version with a prolonged working time (+) and one providing fast curing (-) are available. The system provides a quick turnaround allowing the installation in a single day. The product displays excellent curing capability even at very low temperature levels. This product offers superior mechanical and chemical properties and is low maintenance. It also displays a superior aesthetic finish and excellent UV stability. Two- or three-coat systems can be considered. LABSHIELD ECO products are available in grey, tan and black. Special colors available on request.
3-Gallon Kit =
A 1gal 1gal + B 1gal
15-Gallon Kit =
A 5gal 5gal + B 5galDownload TDS: LABSHIELD ECO
The two-component (1A:1B), LABFAST BASIX floor coating system is a best value, Non-Yellowing, High Performance and Long Working Time Polyaspartic.
The LABFAST BASIX can be used as a clear top coat and as a colored base coat using the LABTEC Universal Pigment Pods. The product offers an attractive combination of long working time and short curing allowing the installation of the floor system in a single day. The product displays excellent curing capability even at very low temperature levels. This product offers superior mechanical and chemical properties and is low maintenance.
It also displays a superior aesthetic finish and excellent UV stability which makes it ideal for interior and exterior applications. Two- or three-coat systems can be considered.Download TDS: LABFAST BASIX
|2-Coats System||3-Coats System|
|Product||Mix Ratio||Working Time||Tack Free||Base Coat + LABTEC Chips||Top Coat||Base Coat 1||Base Coat 2 + LABTEC Chips||Top Coat|
|LABFAST 70 - ¹||1A:1B||15 min||35 min||4-9 mils||4-9 mils|
|LABFAST 85 -||1A:1B||15 min||45 min||8-13 mils||8-13 mils||4-9 mils||4-9 mils||8-13 mils|
|LABFAST 85 +||1A:1B||25 min||2h||8-13 mils||8-13 mils||4-9 mils||4-9 mils||8-13 mils|
|LABFAST 90 -||1A:1B||15 min||45 min||8-13 mils||8-13 mils|
|LABSHIELD ECO -||2A:1B||15 min||2h||8-13 mils||8-13 mils|
|LABSHIELD ECO +||2A:1B||25 min||4h30||8-13 mils||8-13 mils|
Shown working and tack free times are for the LABFAST LO.
¹ Only available in the VOC-exempt version.
Complete Range of High Performance Polyaspartics
Our LABFAST and LABSHIELD polyaspartic products are low odor, VOC exempt or 100% solids. Our formulations are based on advanced aliphatic coating system technology displaying superior aesthetic finish and unmatched UV stability (non-yellowing). polyaspartics also offer superior mechanical and chemical properties including unparalleled impact resistance and superior resistance to chemical products. We offer a vast array of polyaspartics with different viscosities and curing times to optimize key parameters such as adhesion to concrete and overall system performance. One-day installation of flooring systems is possible with the LABFAST product line. We recommend using LABTEC vinyl chips to obtain optimal results when installing a flake system.
Provide your email adress to subscribe to our newsletter.