Polyaspartic Coatings

Our Products

LABFAST LO / LABFAST VOC-EXEMPT

arrow

LABFAST LO

  • Low Odor
  • Low Temperature Curing
  • Rapid Curing
  • Interior
  • Exterior
  • Full UV Protection

LABFAST VOC-EXEMPT

  • VOC-Exempt
  • Low Temperature Curing
  • Rapid Curing
  • Interior
  • Enhanced Exterior Performance
  • Full UV Protection

The LABFAST product series are a two-component, high-solid content, polyaspartic coating systems. There is a low odor version, the LABFAST LO and a VOC-exempt version, LABFAST VOC-EXEMPT. The product is available in four levels of solids content: 70, 80, 85 and 90 as well as long working time versions (+) and fast curing versions (-). The different combinations of curing times and viscosities optimize overall system performance and allow one-day installations. The products are easy to mix with a ratio of 1:1 and there is a common hardener for the base and top coat. It is possible to install a two or three coat floor system with the LABFAST. LABFAST products are available in grey, tan and black. Special colors available on request.

2-Gallons Kit = A 1gal + B 1gal  

10-Gallons Kit = A 5gal + B 5gal

Download file: LABFAST LO Download file: LABFAST VOC-EXEMPT

LABSHIELD ECO

arrow
  • 100% solids
  • Low Odor
  • Low Temperature Curing
  • Rapid Curing
  • Interior
  • Optimal Exterior Performance
  • Full UV Protection

The LABSHIELD ECO is a two-component, 100% solids odor free polyaspartic coating. It displays similar properties to our LABFAST system, except for the elongation which is above industry standards. The LABFAST and LABSHIELD products have been designed for interior and exterior installations. Solvent based polyaspartic products have always been suitable for outdoor installations, but 100% solids products offer better performance.

3-Gallons Kit = A 1gal 1gal + B 1gal   15-Gallons Kit = A 5gal 5gal + B 5gal

Download file: LABSHIELD ECO
  • Low Odor, VOC-Exempt  or 100% Solids
  • Non-Yellowing
  • One-Day Installs
  • Exterior Applications
  • Unparalleled Mechanical Properties
  • High Chemical Resistance
  • Residential, Commercial  and Industrial

Recommandation for Light Traffic

        2-Coats System 3-Coats System
Product Mix Ratio Working Time Tack Free Base Coat + LABTEC Chips Top Coat Base Coat 1 Base Coat 2 + LABTEC Chips Top Coat
LABFAST 70 - ¹ 1A:1B 15 min 35 min     4-9 mils 4-9 mils  
LABFAST 85 - 1A:1B 15 min 45 min 8-13 mils 8-13 mils 4-9 mils 4-9 mils 8-13 mils
LABFAST 85 + 1A:1B 25 min 2h 8-13 mils 8-13 mils 4-9 mils 4-9 mils 8-13 mils
LABFAST 90 - 1A:1B 15 min 45 min   8-13 mils     8-13 mils
LABSHIELD ECO - 2A:1B 15 min 2h   8-13 mils     8-13 mils
LABSHIELD ECO + 2A:1B 25 min 7h   8-13 mils     8-13 mils

Shown working and tack free times are for the LABFAST LO.

¹ Only available in the VOC-exempt version.

Complete Range of High Performance Polyaspartics

Our LABFAST and LABSHIELD polyaspartic products are low odor, VOCexempt or 100% solids. Our formulations are based on advanced aliphatic coating system technology displaying superior aesthetic finish and unmatched UV stability (non-yellowing). polyaspartics also offer superior mechanical and chemical properties including unparalleled impact resistance and superior resistance to chemical products. We offer a vast array of polyaspartics with different viscosities and curing times to optimize key parameters such as adhesion to concrete and overall system performance. One-day installation of flooring systems is possible with the LABFAST product line. We recommend using LABTEC vinyl chips to obtain optimal results when installing a flake system.

Newsletter Subscription

Provide your email adress to subscribe to our newsletter.