EPOXY PRIMER is an epoxy coating that is high in elongation and contains a low viscosity enabling greater adhesion to your substrate. For high traffic applications we recommend using our EPOXY PRIMER. LABPOX products offer a working time of approximately 60 minutes, low viscosity and are resistant to amine blush. By using the appropriate LABPOX system, professional installers can achieve optimal results within a desired timeframe. They are also ideally suited for metallic systems.
3-Gallon Kit =
A 1gal 1gal + B 1gal
15-Gallon Kit =
A 5gal 5gal + B 5gal
LABPOX products can be used both as a basecoat as well as a topcoat. For high traffic applications we recommend using our EPOXY PRIMER. LABPOX products offer a working time of approximately 60 minutes, low viscosity and are resistant to amine blush. A fast setting version (FAST CURE) is also available with a tack free time of only 4 hours. By using the appropriate LABPOX system, professional installers can achieve optimal results within a desired timeframe. They are also ideally suited for metallic systems. The LABPOX 30 is available in an unlimited choice of colors.
3-Gallon Kit =
A 1gal 1gal + B 1gal
15-Gallon Kit =
A 5gal 5gal + B 5gal
LAPBOX 40 UV has one of the highest UV resistance in the industry (yellowing) which makes it a first-in-class product for applications requiring a superior aesthetic finish. LABPOX products can be used both as a basecoat as well as a topcoat. For high traffic applications we recommend using our EPOXY PRIMER. LABPOX products offer a working time of approximately 60 minutes, low viscosity and are resistant to amine blush. By using the appropriate LABPOX system, professional installers can achieve optimal results within a desired timeframe. They are also ideally suited for metallic systems. LABPOX 40 UV is available in clear only.
3-Gallon Kit =
A 1gal 1gal + B 1gal
15-Gallon Kit =
A 5gal 5gal + B 5gal
The LABPOX MVB FAST acts as a moisture barrier for concrete floors with high residual humidity (up to 100%) as well as new concrete slabs installed within 28 days. LABPOX MVB FAST is used as a primer prior installing a complete epoxy or polyaspartic system. The product can receive a subsequent layer of coating in as little as 3h30min, thus enabling very rapid commissioning. The product has been formulated with state-of-the-art components and one of the most efficient vapor barrier system in the industry.
2.5-Gallon Kit :
A : 6.67L + B : 2.78L
Improved version of the LABPOX MVB FAST
3 Gal Kit : A : 7.56L + B : 3.78L
More convenient mix ratio
- The new 2:1 ratio makes it a lot easier when using partial kits
- No more waste
More Working Time
- 10 more minutes to work the product, from 20 to 30 minutes
- Only 4 hours for Dry to Touch, slightly up from 3 hours previously
Product | Mix Ratio | Working Time | Tack Free | Color / Finish | Primer Coat | Base Coat | Top Coat | Protective Coat (Optional) |
---|---|---|---|---|---|---|---|---|
EPOXY PRIMER (Optional) | 2A:1B | 45 min | 4h | Clear/Glossy | 4-6 mils | |||
LABPOX MVB FAST (Optional) |
2.4A:1B 2A:1B |
20 min 30 min |
3-3:30h 4h |
Clear/Gray/Tan/Black/White | 16 mils | |||
LABPOX 30 | 2A:1B | 65 min | 10h | Unlimited/Glossy | 8-10 mils | 10-12 mils | ||
LABPOX 30 FAST CURE | 2A:1B | 15 min | 4h | Unlimited/Glossy | 8-10 mils | 10-12 mils | ||
LABPOX 40 UV | 2A:1B | 60 min | 9h | Clear/Glossy | 8-10 mils | 10-12 mils | ||
AQUALAB PUR MATTE (Optional) | 5A:1B | 20 min | 1h | Clear/Matte | 2 Coats totalling 2-3 mils (dry) |
Industrial Grade Products, Superior Aesthetic Finish
LABPOX epoxy lines are two-component epoxy floor coating systems which are 100% solids and odorless. Our formulations are based on high performance cycloaliphatic polyamine technologies displaying outstanding properties and a superior aesthetic finish. Our LABPOX products possess superior mechanical and chemical resistance properties ideally suited for the most demanding applications as well as to obtain an impeccable finish. LABPOX 40 UV possesses one of the best UV resistance (yellowing) in the industry.
PROTECTION (optional)
Our water-based aliphatic polyurethane, AQUALAB PUR MATTE, can be used as a protective layer on LABPOX products as well as a matte finish. We recommend using LABTEC vinyl chips to obtain optimal results when installing a flake system.
Provide your email adress to subscribe to our newsletter.